| Calibration |
A precise work with measurement instrumentations demanded high flawless equipment. Changing environmental conditions, thermal, mechanical and chemical demands could give with rising inserts of the equipment inexactly measurements.
To assure the dependability of the measurements results and the longevity of the equipment, we approve a regularly calibration. Therefore we offer you our calibration service with a inspection document. The certificate of inspection to DIN EN 1024:2004/3.1 is accounting for the dates of the Reference Point Measurement, the calibration values and the insecurity. It confirms the access to national measurements and registered the quality of your measurement equipment.
Calibration means to check the correctness of the measurements of the equipment. The calibration takes place without any contact in the measurement system.
Advantages:
- Repeatability of the measurements
- Increase of the acceptability about the measurement
- Ascription to national standards
- Increase of quality
There are no fixed calibration terms. We approve an annual calibration, but the frequency is addicted to your requirements and the application of the equipment.
| Calibration equipment |
| Absolute pressure | Barometers Barographs Sensors for atmospheric pressure Data logger for atmospheric pressure |
  |
|
| Temperature | Thermometers Thermographs Sensors for temperature Data logger for temperature |
||
| Air humidity | Hygrometers Hygrographs Sensors for relative humidity of air Data logger for relative humidity of air |
||
| Temperature/Air Humidity | Thermo hygrometers Thermo hygrographs Sensors for relative humidity of air and temperature Data logger for relative humidity of air and temperature |
| Certificate of calibration |
| Calibration points | Article nr. | Price | ||
ABSOLUTE PRESSURE Download Muster ... in the pressure test room |
750...1150 hPa 10 Checkpoints divide above the measurement area |
ISO.1PR10 | 56,- € | |
| TEMPERATURE Download Muster ... in the climate test room |
3 temperature points 0°C, +20°C, +40°C |
ISO.1TE03 | 78,- € | |
| AIR HUMIDITY Download Muster ... in the climate test room |
3 humidity points 33%, 75%, 96% |
ISO.1HU03 | 92,- € | |
... in the climate test room |
1 temperature- + 3 humidity points +20°C and 33%, 75%, 96% |
ISO.1TH13 | 98,- € | |
| ... in the climate test room |
3 temperature- + 3 humidity points 0°C, +20°C, 40°C und 33%, 75%, 96% |
ISO.1TH33 | 128,- € |
| Testing facility |
| Test chamber for a complex climate simulation (Fischer climate-pressure-test chamber) |
|||
| Performance ranges: | |||
| Pressure: | 20...1200 hPa | ||
| Temperature: | -40...+120 °C | ||
| Air humidity: | 5...98% r.h. (5...80% r.h. in the range of -40...0 °C) | ||
| Speed of change: | |||
| Pressure: | 100 hPa/min (100 ... 0,1 hPa/min in the range lower than 600 hPa) | ||
| Temperature: | 5 K/min (-40 to +120 °C), 2 K/min (+120 to -20 °C), <2 K/min ( -20 to -40 °C) | ||
| Air humidity: | 10 %/min (5 to 98 % r.h.), 3 %/min (98 to 5 % r.h.) | ||
| Stability of adjusted climate values: | |||
| Pressure: | ± 0.3 hPa | ||
| Temperature: | ± 0.1 K | ||
| Air humidity: | ± 3 % r.h. | ||
| Reference Point Measurement equipment: | |||
| Pressure: | Pressure DPI 740 SNr. 74001562 accuracy ± 0.15 hPa | ||
| Temperature: | DE P655 SNr 6550206 1060/020102/109014/050285 accuracy ± 0,03 K | ||
| Air humidity: | DE P655 SNr 6550206 1060/020102/109014/050285 accuracy ± 0,15 % r.h. | ||
| Dimensions of test room: | |||
| 45 cm x 45 cm x 50cm | |||
| approx. 100 l test room volume | |||
You are here:
Calibration service / Calibration